Huawei BM622i MAC Changer via SPI Flasher

This tutorial for Wimax BM622i modem you need a know how in hex and electronics, you need also a hot air tools. Change MAC using LPT Flasher and dump files and SPI Program, There are humor that Bm622i is similar to xbox 360.

STEP BY STEP HOW TO USED SPI PROGRAM Update CLICK HERE

This is the WAN IC "Spansion 25FL128"

To protect the Spansion 25FL128

Try This easy to remove by debug

Create a Homemade Flasher

Here is the SPI circuit You can buy parts in electronics shop like ALEXAN you won't spend 200 pesos. Some trouble with try 2 use 74hc244 na IC,, ground pin#1&10 and remove pullup resistor. To learn about LPT Flasher asked Google

Connect your Spansion 25FL128 Chip on the flasher, PIN is the dotted.

Connect your Flasher on LPT (Parallel Port)

New PCs motherboard don't have parallel port support. Alternative, I find CD RKING PCI Parallel Card for 280 pesos.

DOWNLOAD SPI FLASHER SOFTWARE

Run SPI program Calibrate then Select Device family Spansion

NOTE: Windows 7 must change to XP this incompatibility issue you may have prompted with BLUE SCREE.

Click ID to test in your Flasher read your IC

Read your Device You can save your dump file here

You need to find your MAC WAN in offset here you must know how to use HEX and chance value.

The finished PCB in action, just remember to erase the chip first before re-programming, it works best that way...

DOWNLOAD HEX WORKSHOP FOR EDITING HEX

Find your MAC and EDIT

Supported chips (and possibly others):

AMIC:

• A25L05PU/PT (64kB)
• A25L10PU/PT (128kB)
• A25L20PU/PT (256kB)
• A25L40PU/PT (512kB)
• A25L80PU/PT (1MB)
• A25L16PU/PT (2MB)
• A25L32PU/PT (4MB)
• A25L64PU/PT (8MB)
• A25L512 (64kB)
• A25L010 (128kB)
• A25L020 (256kB)
• A25L040 (512kB)
• A25L080 (1MB)

Atmel:

• AT26DF041 (512kB)
• AT26DF081A (1MB)
• AT26DF161A (2MB)
• AT26DF321 (4MB)

EON:

• EN25P16 (2MB)
• EN25P32 (4MB)
• EN25P64 (8MB)
• EN25P128 (16MB)
• EN25F16 (2MB)
• EN25F32 (4MB)
• EN25F64 (8MB)
• EN25F128 (16MB)

Macronix:

• MX25L1005 (128kB)
• MX25L2005 (256kB)
• MX25L4005 (512kB)
• MX25L8005 (1MB)
• MX25L1605 (2MB)
• MX25L3205 (4MB)
• MX25L6405 (8MB)

Spansion:

• S25FL004A (512kB)
• S25FL008A (1MB)
• S25FL016A (2MB)
• S25FL032A (4MB)
• S25FL064A (8MB)
• S25FL128P (16MB)

SST:

• SST25VF010 (128kB)
• SST25VF020 (256kB)
• SST25VF040 (512kB)
• SST25VF080 (1MB)
• SST25VF016 (2MB)
• SST25VF032 (4MB)
• SST25VF064 (8MB)
• SST25VF128 (16MB)
• SST26VF016 (2MB)
• SST26VF032 (4MB)
• SST26VF064 (8MB)
• ST Microelectronic:
• M25P10 (128kB)
• M25P20 (256kB)
• M25P40 (512kB)
• M25P80 (1MB)
• M25P16 (2MB)
• M25P32 (4MB)
• M25P64 (8MB)
• M25P128 (16MB)

Winbond:

• W25X10 (128kB)
• W25X20 (256kB)
• W25X40 (512kB)
• W25X80 (1MB)
• W25X16 (2MB)
• W25X32 (4MB)
• W25X64 (8MB)

UPDATE!! Flasher Version

This one no need to remove the Spansion chip

A Ultra Fast USB flasher!!

LPT Simple version

8x or more (thin) wires. The chip had 8 pins after all.
- 8x pins (taken from unused LPT cable)
- 1x 3V CR2302 battery
- 1x 1000uF capacitor
- 8x 100ohms resistor (Use appropriate value - depends on your LPT port output impedance and wiring parameters)

Nadar Gator Version
added a voltage regulator to power it directly from USB port, a switch and some LED indicators .. the extra 3 pin white-connector you see is to get +5VDC & +3.3VDC directly out (optional)

Darwin bagsik version!!

UPDATE KASAMIKOS Flasher

Professional Quality USB SPI Programmer with SOIC8 Adapter!

Read more Baklas kabit : http://www.symbianize.com/showthread.php?t=857495

Updated USB SPI Programer Software: Download USBSPI

cadsoft.eagle.professional.v6.1.0
#If you want to buy SPI Flasher Ready to USED..

Check kasamiko USB type thread http://www.symbianize.com/showthread.php?t=859776

Check SPIflash LPT type thread http://www.symbianize.com/showthread.php?t=877589

FREE DUMP FILE: 622 and 626

IF you have any dump file there like 2010 share it here lets help each other.
working copy ng bm622 wan data

Download Now

http://www.mediafire.com/?qjj15zcmj1sl4ak

Download bm622i 2011 click here

Download Bm622i 2010 click here

Read More

PS3 NOR FLASH GONE BAD ?

I have a CECH 2051b with progskeet installed. I followed a tutorial called noobs guide to downgrade from 3.7x. (found here) http://www.ps3hax.net/2011/08/noob-tuto ... kmeaw-cfw/

My console was running kmeaws 3.55 when it was updated by a child. I had enough soldering skills to get the install done but ran into problems with flashing.

I started by Dumping 4 different nor dumps from my JSD-001 with spansion and then followed the instructions to patch with transplant+ v1 then import to flow rebuilder and flashed finished patch file. It flashed to 100 percent, but with many errors on verification. (Used winskeet4000 on WIN7 ULTIMATE N) Would have used xp but could not get progskeet to recognize in virtual box.

After this flash I waited 30 minutes and the PS never rebooted. I finally pulled plug and reboot back to a black screen only. Green power light when turned on but black screen and no access to FSM. I tried to flash original dump back on it and got same results so I decided it must be the flash side of the progskeet. My wires were long so I decided to de-solder everything, shorten the wires and start over. Now I have re-soldered and tried rebooting and only get three beeps when I press power. If I press the eject button the fan comes on and stays on but still will not power the progskeet.

Has anyone run into this problem or found a way out of it? why would the system stop powering on now completely? Any help would be appreciated.

Couple of install pics.....

Need to be done before patching and trying anything else as follows:

1- make at least 5 dumps of the original NOR image
2- compare the dumps to check if you have a proper reading
3- extract the dump using flowrebuilder to see if it's valid as a first check.
4- check the dump well following the steps and details on PS3DevWiki. ---> Validating the Dump
5- once you are sure you have a 100% valid dump, you must flash it back to PS3 NOR to ensure you also have a stable/reliable writing method/setup ---> Test Report Table

If all this worked fine, you can proceed to patch the NOR dump using the Simplified Downgrade V2 method ( also found on PS3DevWiki with the patches to use ) --> NOR patching

No more need for the "transplante" software in Simplified Downgrade V2, the tutorial you followed seems to be still using the very first method Downgrade V1.

Now your PS3 is not booting because it doesn't have a valid image flashed in the NOR, you mentioned that writing had verification errors so probably your writing method was not stable,

also I would like to mention here that many times the very old version of Progskeet Flasher works much better then the latest winskeet released.

Here's the link to the old Flasher I use for Flashing the NOR image back into PS3 ----> ProgSkeet 110819 Flasher

You can also see the successful results from the table linked here ---> Test Report Table

Also for more help you can join our IRC channel on Efnet called: #ps3downgrade where lot of guys are willing to help you in detail to solve your problem and get the PS3 working fine again, most of the discussions and help about downgrading is going in that channel... (#Ps3downgrade)

Read More

MTX USB SPI NAND Flasher Programmer

Matrix 360 NAND Programmer MTX USB SPI Flasher V1.0 For XBOX360 Game Module

Specification:

• Matrix NAND Programmer MTX SPI Flasher V1.0 For XBOX360
• Cost effective NAND reader / programmer to complete the GliGli Hack.
• It features a PIC18F2455 microcontroller for stable and quick reading/writing of all NAND models available on the different XBOX360 models.
• The Matrix NAND programmer is also fully compatible with NANDPRO 2.0e and several other third party programming tools.

Features:

• Fast USB SPI 360 NAND programmer.
• Fully compatible with all XBOX360 NAND models.
• Fully compatible with NandPro2.0e Software and other third party software.
• Easily reprogrammable with via USB connector.
• Quick reading and writing times.
• Microchip based for enhanced stability

Read More

Huawei Bm622i MAC Changer Flasher by dBug

Today dBug from Symbianize Forum release his year end tutorial on how to change MAC address on CPE Huawei BM622i Wimax modem to the public. Yes the cost of the hardware is only 50 pesos about $1 believe it or not, you may now be able to tweak your CPE Huawei BM622i WiMAX modem such as changing the MAC address that many people have been awaited. In addition, bad firmware or brick WiMAX CPE is now possible to be repaired by this tiny electronic circuit its the (SPI Flasher/LPT). What you need are just this few things.

Download the rar file that include:

• BM622i bin 2010
• bm622i_public pdf file full tutorial
• X-Ways.WinHex.v15.9.SR-7
• SPI FlashROM Programmer 1.9c

SPI FlashROM Programmer 1.9c
****************************

SPIPGM - binary for Linux
SPIPGM.EXE - binary for DOS/Win9x
SPIPGMW.EXE - binary for Win9x/NT/2k/XP
IOPERM.DLL - low-level HW access library for Win9x/NT/2k/XP/Vista/7(NoUAC)

Version 1.7+ has improved LPT port handling resulting in 1.6x faster reading

You can check from here the list of supported SPI FlashROM:

https://docs.google.com/file/d/0Bx41Hy9aW5BaN25Dd1hWLWY5VjQ/edit?pli=1

http://rapidshare.com/files/1462160046/bm622i_fixed.rar

http://www.mediafire.com/?58z12yy533lc5ba

This article is taken from Symbianize forum you can check the original link here.

Read More

USB Port 24CXX 25XX EEPROM BIOS Programmer TTL For XP WIN7 MX25L12805 W25Q128

These two (2) USB port 24CXX and 25XX Eeprom BIOS Programmer is identical in nature because they used the same Chips based on CH341 series but not on its physical appearance. These two flasher/programmer support the same type of Chips/IC likewise it provides pin header to be used as TLL and UART fro debricking residential gateway such as modems, routers and wireless access point (WAP). Support list of Chips/IC with different vendors/manufacturer this link.

These flasher/programmer also support MS Windows OS such as XP, Vista and 7. You can download the respective driver here, software SPI Tools here and for the tools here. This product can be found on eBay in case you wanted to see for additional details.

Read More

Huawei Echolife BM622 repair blank WAN easily

This article is supposed and not only intended to jEnNrhANz comment on my previous post Huawei BM622 Blank WAN Solved! but also to other netizen who is facing similar problem on having hard time solving the blank WAN issue likewise for the "tulala" this will help their life more easier.

Snapshot taken by Canon Rebel T3 using macro lens

The screenshot above as many of you are familiar with the board of Huawei Echolife BM622 this is the so-called WAN_IC, most the version of Huawei BM622 4G WiMAX broadband modem wireless router it uses ST Micro M25P32 (25P32V6G) 32Mbit, Low Voltage, Serial Flash Memory. Another version of this device gateway is using different chips but there is an alternative substitute/reference for Serial Flash Memory to those who are techie.

To make life more easier on DIY repairing the BM622 "blank WAN" likewise the "tulala" issue there is no need for "Baklas Kabit" meaning no need for you to removed the WAN_IC and put it back again after re/flashing. Without taking off the chip is best to re/flash the WAN_IC to avoid damaging by using a "hot air".

Here's few things I need:

Take note for the soldering lid used here I have chosen the tiniest 0.3mm diameter because the thick one will not do the work well, you can find on the cellphone technician shop ask only for 1meter is enough.

Tiny copper wire this will be used for jumpering the ST Micro M25P32 Serial Flash Memory or the WAN_IC, its 0.10mm diameter just like the strand of your hair. This is also a cellphone technician best friend you can ask for 1meter is enough.

An alternative where you can get a tiny copper is from your busted cheap fluorescent lamp. When using a soldering iron a pointed tip is best to not mess with lid since M25P32 surrounded by tiny capacitor and resistor it might be damaged or may short circuited with other parts.

The simplest programming/flashing the M25P32 Serial Flash Memory is to used the IC socket with tiny copper wires atleast two IC socket will do and a candle glue you can get this from eGizmo if you are in Manila or Alexan.

My USB MiniPro TL866CS Universal Programmer I bought it from eBay, it can programmed of thousand of chips, read, write and re-flashed different types of eeprom, flash memory, etc.

The BlackcatUSB can also read, write and re-flashed but only limited chips unlike the TL866 can do thousands. The good thing about this programmer device is that you can use it as JTAGging also bought from eBay.

This is not the least option or alternative for repairing the Huawei Echolife BM622 4G WiMAX broadband wireless modem router blank WAN likewise for "tulala". The cheapest for about less than 50pesos or FREE hardware for flashing the M25P32 is the LPT a homemade flasher. It is slower when programming if compared to the above two USB programmer/flasher

AEOLUS rework station is just an option if you prepare the "baklas kabit", removing and putting it back from the board of the Echolife BM622 the ST Micro M25P32 Serial Flash Memory is really so tricky because you might burned it by using the "hot air" improperly.

Read More